What the Genya is
Breton describes the Genya as a 5-axis monobloc disc-type cutting centre: bridge, legs and tilting table are one welded unit, so the machine ships and sets as a single piece. Breton lists three variants: Genya, Genya Switch and Genya Flux. Used listings also use the designation "Genya 600", referring to the maximum blade diameter.
Published specifications from Breton:
- Axes: X 3,800 mm, Y 2,750 mm, Z 500 mm travel; C rotation 380°; A tilt 0–90°
- Blade diameter: 300–600 mm (12–24 in)
- Maximum cutting thickness: 185 mm with a 600 mm blade
- Spindle motor: 18 kW (S1) / 22 kW (S6)
- Worktop: 2,400 mm wide; 3,800 mm long (Genya, Genya Switch) or 4,000 mm long (Genya Flux)
- Machine weight: 6,500 kg (Genya); 7,500 kg (Switch); 9,500 kg (Flux)
- Up to four tools mounted and ready, including the Rocket Tool with finger bit and the patented Kerasplit for ceramic materials
- Bridge camera for slab photographing, touch probe for thickness, and spindle vacuum cups for automatic piece handling
The control software has an Easy mode for straight and miter cuts from the touchscreen and an Advanced mode for shaping and nested programs. A laser shows the cut path on the slab before the blade drops.
What it’s used for
The Genya is a production saw for countertop fabrication. Typical work includes:
- Straight and nested cuts on granite, quartz and quartzite slabs
- Porcelain and sintered stone, where the rubber-covered table and Kerasplit tooling reduce chipping
- Miter cuts at 0–90° for waterfall edges and built-up laminated edges, with the probe correcting for slab thickness
- Sink and cooktop cutouts with the finger bit, so the piece leaves the saw ready for the router or polisher
- Photographing the slab on the saw table and laying out parts around veining before cutting
What to check when buying a used Genya
These are the points we ask sellers about and that you should confirm before committing:
Spindle hours. Ask for a photo of the hour meter or controller screen. Hours frame the likely condition of bearings and drives.
Head and 5-axis calibration. Have the seller run a test miter and a square cut on video. Look for clean 45° joins and parts that measure to drawing. A head that has been hit shows up in repeatability.
Pump, water and filtration. Check through-spindle water flow, the pump and any recirculating system. Rust streaks and scale around the head tell you about water quality at the previous shop.
Table. Look over the rubber table covering for gouges, missing sections or warping. Check the tilting mechanism moves smoothly through its full range.
Software and controller version. Confirm the software release, whether licences transfer with the machine, and whether Breton support is available for that version. Ask for the controller serial.
Tooling. Blade, finger bit, Kerasplit and vacuum cups are consumables and attachments that add real cost if missing. Get an inventory.
Electrical. Confirm the rated supply on the nameplate and match it to your shop’s service. We have not independently verified the Genya’s North American voltage requirements, so rely on the nameplate photo and your electrician.
Every listing discloses known issues, and most include a running video. If a seller cannot show the machine running, we say so.
Typical used price range
Asking prices we have seen for used Breton Genya saws range from about $26,000 for an early-2000s unit at an auction floor to about $138,000 for a 2023 unit described as like new. Where a machine falls in that range depends on year, hours, variant, tooling included and whether it is still under power.
Our current 2023 listing is asking $165,000, which reflects a late-model machine in excellent condition. We share this market guidance with both buyers and sellers so pricing conversations start from the same facts.